押庄龙虎手机app下载

| Your location: Home > Products > Coal-fired thermal oil furnace > Text

YLW horizontal coal-fired thermal oil furnace

评论: 0 Author: Source: Date: 2017-3-22 15:36:06 Popularity: 147 Comments: 0

201310178478820.jpg


YLW horizontal coal-fired thermal oil furnace

Product Range

Heat supply: (160-2000) × 104Kcal / h, design pressure: 1.1MPa

YLW series organic heat carrier furnace is an assembled forced circulation chain grate boiler. The front part of the boiler body is the radiant heating surface of the furnace, which is composed of densely arranged double-sided coils; the rear part is the convection scouring heating surface, which is composed of a serpentine tube bundle. The boiler consists of an upper body and a lower chain grate, which are assembled on site. The air preheater is located behind the boiler. The high-temperature flue gas generated by the combustion takes up part of the heat in the furnace, and then enters the convection heating surface for heat exchange by turning the smoke chamber. After exiting the boiler, the air required for the combustion of the boiler is heated in the air preheater, and then the dust fan will remove The flue gas is sent to the chimney and discharged into the atmosphere.

Easy installation, as long as the upper body and the lower furnace are closed, the installation cycle is short.

The furnace uses double-dense coiled coils, and the heating surface is adequately arranged to reduce the heat load on the surface of the tube. It is safer to use heat transfer oil.

The medium flow is reasonable, and the heat transfer oil is from low (import) to high (export). The gas generated during operation is difficult to stay in the furnace and can be conveniently discharged from the system.

The design of the furnace arch is reasonable, the flue gas stays in the furnace for a long time, and the combustion is more sufficient.

Turn the smoke chamber to arrange the heating surface, so that the partition wall can avoid direct flushing of high-temperature smoke and effectively prevent the smoke wall from falling off.

Data | Model

YLW-1900MA

YLW-2300MA

YLW-2900MA

YLW-3500MA

YLW-4100MA

YLW-4700MA

YLW-5900MA

Heat supply × 104kcal / h

160

200

250

300

350

400

500

Thermal efficiency%

75

75

75

75

75

75

75

Design pressure MPa

1.1

1.1

1.1

1.1

1.1

1.1

1.1

Working temperature ℃

320

320

320

320

320

320

320

Medium circulation m3 / h

160

160

200

200

260

260

300

Supervisor caliber DN

150

150

200

200

200

200

250

Installed capacity KW

75

90

100

100

120

140

175

Applicable fuel

Bituminous coal of type Ⅱ and Ⅲ


Data | Model

YLW-7000MA

YLW-8200MA

YLW-9400MA

YLW-12000MA

YLW-14000MA

YLW-16500MA

YLW-17500MA

Heat supply × 104kcal / h

600

700

800

1000

1200

1400

1500

Thermal efficiency%

75

75

75

75

75

75

75

Design pressure MPa

1.1

1.1

1.1

1.1

1.1

1.1

1.1

Working temperature ℃

320

320

320

320

320

320

320

Medium circulation m3 / h

340

400

520

600

680

800

1000

Supervisor caliber DN

250

250

300

300

350

350

400

Installed capacity KW

215

215

270

315

380

460

540

Applicable fuel

Bituminous coal of type Ⅱ and Ⅲ

Note: Due to the continuous improvement of our company's products, the above product parameters will be continuously updated, the list on this page is for reference only. The listed boiler types are representative products of our factory. For other models and parameters of boilers, please refer to relevant drawings and documents.


    label:
    Previous: No information
    I want to make an inquiry
    Product name: *
    YLW horizontal coal-fired thermal oil furnace
    Name: *
    Phone number: *
    Email: *
    Remarks:
    Verification code: *
    Home | About Us | Products | News | Corporate Culture | Contact Us | Feedback | Sitemap